IR Remote Control For Selectable CCT and Wattage Fixtures
Part Number:
HD05R
Manufacturer Part Number:
$48.99
ea.
Was
In Stock
Similar Products Available Today
Features
- Compatible with Microwave and PIR motion sensors for Selectable CCT and Wattage fixtures
- Easy-to-read screen display
- Adjust and program operational settings
Most Popular Compatible Products
Overview
Use the IR remote to control a selectable CCT or wattage fixture when it is paired with a microwave motion sensor or a PIR motion sensor. The remote has a 39.4ft communication range and operates using 2 x AAA batteries (not included). The screen display simplifies operation. Use the memory setting to create a preprogrammed dimming level or dim the fixture manually. The remote also allows you to adjust the lux level after movement has been detected, stand-by duration, and the detection area.
Product Details:
- 12m communication range
- Battery type: AAA x2 (not included)
Documents
HD05R User Manual Dimensional Drawings
Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Specifications
| Ambient Operating Temperature | 0 to 35 °C (32 to 95 °F) |
|---|---|
| Battery Type | AAA (x2 not included) |
| Detection Range | 39.4 ft (12 m) |
|
Environmental Rating
Environmental Rating
Suitable for Dry Locations This marking indicates that you can use the light or component in a location not normally subject to dampness. This may include locations exposed to temporary dampness, such as a building under construction, provided that ventilation is adequate to prevent moisture accumulation. Use these fixtures in living rooms, bedrooms, offices, hallways, and similar areas. The marking may be "SUITABLE FOR DAMP LOCATIONS" or "DRY LOCATIONS ONLY."Suitable for Damp Locations Fixtures marked “SUITABLE FOR DAMP LOCATIONS” or “SUITABLE FOR WET LOCATIONS” can be installed in damp locations. A damp location is an exterior or interior location regularly or occasionally subject to moisture condensation on or around electrical equipment. It includes partially protected places such as covered patios and porches. Damp locations include any regularly muggy or humid area, such as above a kitchen sink or stove, and appropriately vented bathrooms near the tub or shower.Suitable for Wet Locations Fixtures and components marked "SUITABLE FOR WET LOCATIONS" can be installed in wet or damp locations. A wet location is anywhere water or other liquids may drip, splash, or flow on or against electrical equipment. A light marked "SUITABLE FOR WET LOCATIONS" may have additional markings that tell where and at what height it can be safely mounted. Uncovered outdoor areas like decks, gazebos, walls, and typical landscape lighting sites all fall under the heading of wet locations. |
Non-Weatherproof |
|
IP Rating
IP Rating
 |
IP20 |
| Warranty | 3 Year |
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Industrial Commercial Lighting reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs