JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
Your cart is empty
Looks like you haven't made your choice yet.
Full Cutoff
Half Moon
Mini
Rotatable
Slim
Slim Adjustable
Standard
Wildlife-Friendly
5 Results
N/A
120-277 VAC
Bypassable Photocell
1750 lm
Integrated Photocell (Bypassable)
1400 lm
750 lm
No Photocell
500 lm
Standard LED wall pack light fixtures have the traditional look of metal halide fixtures. They provide wide beam angles and suit industrial and commercial spaces, such as business exteriors, parking lots and garages, and other industrial and commercial spaces.
Our half moon wall packs have a modern look and feature a Type III lighting distribution, covering larger areas. Because of their design's architectural value and the fact that they are the only wall pack with an available accent uplight, these fixtures are ideal for installing in residential complexes and along the exterior of a building.
Mini wall pack lights are smaller fixtures that still emit powerful lighting. Because they are compact, they are ideal for installation in areas such as doorways and outside security lighting for commercial buildings.
We also offer a mini emergency wall pack with a backup battery with a 90-minute run time if your commercial or industrial space loses power.
Slim LED wall pack lights are the perfect solution if you want a low-profile design, but you need a wide light distribution. Slim wall packs deliver the powerful output of traditional LED wall packs in a slimmer, modern form factor.
This slim adjustable wall pack can be adjusted at a 90° angle to rotate the light in the needed direction. The full cutoff wall pack housing creates complete downward lighting. Use these slim adjustable wall packs as wall sconces and sign lighting.
Rotatable LED wall packs feature one or two adjustable lights that can rotate in a full 360° motion. You can turn the light fixtures separately to direct the light where it is needed. These lights can be used as security lighting or as general area lighting when placed on a building's exterior or facade.
The full cutoff wall packs deliver all of the light downward– eliminating any uplight. These fixtures are convenient for areas where a high concentration of light is necessary such as doorways, parking lots, and building perimeters.
Turtle-friendly full cutoff wall packs are available for commercial spaces located in coastal areas. They emit amber light at a wavelength of 590nm, so marine wildlife animals won’t confuse artificial light with natural moonlight.
Certain LED wall packs come with integrated photocells. Photocells monitor ambient lighting and adjust the wall pack accordingly: When the sensor detects low light levels, the fixture will be powered on; when the sensor detects a high level of light, the fixture will power off. You can bypass integrated photocells, and the bypassing process will vary for each fixture. If the photocells are removed or bypassed, you must manually turn the lights on and off with a switch or a timer. In large commercial lighting installs, bypassing the integrated photo is also beneficial if you’re using a master photocell that can turn a whole circuit on and off.
Longevity: LED wall packs are energy-efficient, leading to a significantly longer life span than metal halide fixtures, meaning you can use them longer without worrying about replacements.
Cost Savings: LED wall packs will save money on your energy bill. Also, as mentioned above, these fixtures need to be replaced less often than metal halides or fluorescent fixtures, leading to lower replacement costs over time.
Security Purposes: Having sufficient lighting on the exterior of your commercial building, in parking garages, parking lots, or apartment complexes is a way to provide safety so individuals can see in the early morning or late night hours. It also gives off a greater sense of security.
Durability: Wall packs are rated for outdoor use, so they're built to withstand many conditions. First, all of our wall packs are IP65 rated or above and are suitable for wet locations. Second, the wall packs feature aluminum housing and are corrosion-resistant, so they won’t oxidize due to outdoor conditions. Certain wall packs feature polycarbonate lenses, which are less likely to break. Other wall packs have glass lenses that protect from scratches.
The light output needed will affect the fixture you choose. If you’re using the fixture to provide additional lighting in a parking garage or along the outside of a building, you can typically opt for a fixture with fewer lumens. You will want more lumens if you're using the fixture for sign lighting or illuminating a specific area. Our products list the equivalent wattage of a metal halide to help accurately replace outdated fixtures.
Each of our fixture types comes with various CCT options. We also offer selectable CCT options, so you can adjust the CCT of your light without completely replacing the fixture. Most of our options feature 3000K, 4000K, and 5000K, which means they can display a warm white, natural white, or cool white.
Certain cities or residential areas will have ordinances in place about the installment of outdoor lighting. The ordinances usually involve the maximum light output allowed for the lights (lumens) and the amount of light fixtures allowed to be installed.
Part Number:
