5m Tunable White COB LED Strip Light - Even-Glow® Series - Fully Diffused LED Tape Light - Dimmable - 90+ High CRI - IP20 - 24V - 2700K-6500K
Part Number:
STN-H90-O32A-10K5M-24V
Manufacturer Part Number:
$89.99
ea.
Was
Out of Stock, Expected 12/10/25
Backorder Available
Similar Products Available Today
Features
- COB LEDs deliver an uninterrupted, dotless line of light
- Low-profile design with up to 350 lm/ft ensuring consistent and bright lighting
- 90+ CRI enhances color accuracy and vibrancy for true-to-life illumination
- Flexible, cuttable design with reliable 3M™ adhesive backing provides secure installation
In-House Test Lab
Each of our products undergoes rigorous testing in our in-house test lab to verify quality and specifications.
Hassle-Free Returns & Exchanges
Industry-Leading 45-Day Return & 90-Day Exchange Policies*
Free Lighting Layout Consultation
If you're looking for a customized, energy-efficient lighting layout, our industrial & commercial lighting experts can provide an assessment tailored to your floorplan.
Frequently Bought Together
Total Price:
Loading...
Most Popular Compatible Products
COB LED Strip Lights: Everything You Need to Know
COB LED strip lights provide seamless, dotless illumination by mounting multiple chips on a substrate for enhanced brightness and uniformity. They’re energy-efficient, high-CRI, and ideal for under-cabinet lighting, signage, and architectural accents.
12-Volt vs. 24-Volt LED Strip Lights: What’s the Difference?
12V LED strips are great for shorter runs and simple setups, especially in vehicles or small spaces. 24V strips are better for longer installations, as they reduce voltage drop and maintain brightness over greater distances.
How to Choose the Best LED Strip Light Power Supply
Consider voltage, total length, and whether dimming is needed. It recommends calculating total wattage and selecting a power supply with at least 20% more capacity for optimal performance.
Overview
The 5m Tunable White COB LED Strip Light from the Even-Glow® Series features chip-on-board technology with high-density LEDs to deliver a dotless, uniform line of light. It is ideal for indoor use on reflective surfaces like granite countertops and tile floors. This strip has 185 LEDs per foot, providing up to 350 lm/ft, totaling 5,775 lumens of tunable white light. Trim at cut points every 2.05 inches for precise customization. The flexible design and 3M™ adhesive backing allow easy installation, even on curved surfaces and edges. Combine with a compatible controller to adjust the color temperature from warm white (2700K) to cool white (6500K).
Product Details:
- Max Run: 23ft (7m)
- Strip Width: 10mm
- 0-100% PWM dimmable
- 3M™ adhesive backing
- Connection: 1.6ft pigtail
- 24 VDC Input
- ETL Listed; CE Compliant
- 5-year Warranty
Documents
STN-H90-O32A-10K5M-24V Cut Sheet Dimensional Drawings
Applications:
- Bars and Restaurants
- Countertop Lighting
- Cove Lighting
- Display Cases
- Retail Shops
- Task Lighting
- Toe Kick Lighting
- Trade Shows
- Under-Cabinets
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
COB
COB (Chip-on-Board) LEDs integrate multiple LED chips onto a single module, offering higher brightness and better light distribution in larger lighting installations. This design makes them excellent for high-output applications. Typically, they also have a higher density, producing a "line of light" illumination, making them ideal for lighting reflective surfaces like polished countertops or glass retail displays.
Tunable White
Tunable White bulbs and strips allow users to adjust the color temperature of the light output, ranging from warm to cool white, to suit different settings and preferences. This adjustability is achieved by mixing different proportions of white LEDs with varying color temperatures within a single fixture.
LED Strip Light FAQs
What is color temperature? Which one is best?
What LED strip light accessories do I need?
The only thing you need for certain to power a strip light is a power supply. We offer accessories used for installation, such as connectors and aluminum mounting channels. As well as others that add functionality such as such as dimmers, switches, and remote controls. Complete kits are also offered which include everything you need to get started.
Specifications
| Ambient Operating Temperature | -25 to 55 °C (-13 to 131 °F) |
|---|---|
| Certifications/Compliance | CE, ETL Listed |
|
Color Temperature
Color Temperature
 Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. |
Tunable CCT |
| CRI | 90+ |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
2.9 A |
|
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
177mA |
| Dimmable | Yes |
| Dimmer Type | PWM |
| Efficacy | 90 lm/W |
|
Environmental Rating
Environmental Rating
Suitable for Dry Locations This marking indicates that you can use the light or component in a location not normally subject to dampness. This may include locations exposed to temporary dampness, such as a building under construction, provided that ventilation is adequate to prevent moisture accumulation. Use these fixtures in living rooms, bedrooms, offices, hallways, and similar areas. The marking may be "SUITABLE FOR DAMP LOCATIONS" or "DRY LOCATIONS ONLY."Suitable for Damp Locations Fixtures marked “SUITABLE FOR DAMP LOCATIONS” or “SUITABLE FOR WET LOCATIONS” can be installed in damp locations. A damp location is an exterior or interior location regularly or occasionally subject to moisture condensation on or around electrical equipment. It includes partially protected places such as covered patios and porches. Damp locations include any regularly muggy or humid area, such as above a kitchen sink or stove, and appropriately vented bathrooms near the tub or shower.Suitable for Wet Locations Fixtures and components marked "SUITABLE FOR WET LOCATIONS" can be installed in wet or damp locations. A wet location is anywhere water or other liquids may drip, splash, or flow on or against electrical equipment. A light marked "SUITABLE FOR WET LOCATIONS" may have additional markings that tell where and at what height it can be safely mounted. Uncovered outdoor areas like decks, gazebos, walls, and typical landscape lighting sites all fall under the heading of wet locations. |
Non-weatherproof, Suitable for Dry Locations |
| Finish | White |
| Input Connection Type | Pigtail |
|
IP Rating
IP Rating
 |
IP20 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
180° |
| LED Color | Tunable CCT |
| LED Density | 185 LEDs/ft |
| LED Chip Type | COB (chip-on-board) |
| LEDs per Segment | 32 |
| Length | 16.4 ft (5 m) |
| LED Lifetime | 50000 Hours |
| Lumens Per Foot | 350 lm/ft |
|
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply.   |
23 ft (7 m) |
| Minimum Cut Length | 52mm (2.05in) |
| Operating Voltage | 24 VDC |
| Series | Even-Glow® |
| Strip Width | 10mm (0.39in) |
| Wattage | 70 Watts |
| Wattage per Foot | 4.3 W/ft |
| Wire Length | 19.2 in. |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Industrial Commercial Lighting reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
