24V 5m RGB High-Density LED Strip Light - Color-Changing LED Tape Light - IP20
Part Number:
STN-CRGB-J6-12C5M-24V
Manufacturer Part Number:
Discontinued
Similar Products Available Today
Features
- Customize color, brightness, and color-changing light modes (controller sold separately)
- High density of 36 LEDs per foot for brightest RGB option
- 3-in-1 RGB 4040 SMD LEDs
- 3M™ adhesive backing for surface mounting
- 24 VDC for longer max run
Most Popular Compatible Products
Overview
The 24V 5m RGB High-Density LED Strip Light is designed to be the brightest RGB solution available, featuring a high chip density of 36 LEDs per foot. This strip light offers a wide selection of vibrant colors and whites, making it ideal for applications such as restaurants, kitchens, sign backlights, and more. With field cuttable segments every 1.97", it’s easy to customize the length for your specific project needs. The 3M™ adhesive backing and bare copper pads simplify installation and electrical connections. For optimal performance and longevity, it’s recommended to use an aluminum channel for heat dissipation. This strip light operates on 24V DC and is fully dimmable, ensuring versatile lighting control.
Product Details:
- 24 VDC input
- Max Run: 5m
- Density: 36 LEDs/ft
- Strip Width: 12mm
- 0-100% dimmable
- Connection: pigtail
- IP20 rated for dry conditions
- 50000 hours L70 lifespan
- UL Listed
- 3 year warranty
STN-CRGB-J6-12C5M-24V Specification Sheet Dimensional Drawings
Applications:
- Backlighting
- Bars
- Cove Lighting
- Decorative Accents
- Display Cases
- Restaurants
- Retail Shops
- Sign Lighting
- Trade Shows
Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
RGB
RGB LED strips and bulbs emit one fixed light color in red, green, blue, or a combination thereof.
Specifications
| Ambient Operating Temperature | -20 to 40 °C (-4 to 104 °F) |
|---|---|
| Certifications/Compliance | UL Listed |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
4 A |
|
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
244mA |
| Dimmable | Yes |
| Dimmer Type | PWM |
|
Environmental Rating
Environmental Rating
Suitable for Dry Locations This marking indicates that you can use the light or component in a location not normally subject to dampness. This may include locations exposed to temporary dampness, such as a building under construction, provided that ventilation is adequate to prevent moisture accumulation. Use these fixtures in living rooms, bedrooms, offices, hallways, and similar areas. The marking may be "SUITABLE FOR DAMP LOCATIONS" or "DRY LOCATIONS ONLY."Suitable for Damp Locations Fixtures marked “SUITABLE FOR DAMP LOCATIONS” or “SUITABLE FOR WET LOCATIONS” can be installed in damp locations. A damp location is an exterior or interior location regularly or occasionally subject to moisture condensation on or around electrical equipment. It includes partially protected places such as covered patios and porches. Damp locations include any regularly muggy or humid area, such as above a kitchen sink or stove, and appropriately vented bathrooms near the tub or shower.Suitable for Wet Locations Fixtures and components marked "SUITABLE FOR WET LOCATIONS" can be installed in wet or damp locations. A wet location is anywhere water or other liquids may drip, splash, or flow on or against electrical equipment. A light marked "SUITABLE FOR WET LOCATIONS" may have additional markings that tell where and at what height it can be safely mounted. Uncovered outdoor areas like decks, gazebos, walls, and typical landscape lighting sites all fall under the heading of wet locations. |
Non-weatherproof, Suitable for Dry Locations |
| Finish | White |
| Input Connection Type | Pigtail |
|
IP Rating
IP Rating
 |
IP20 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
120° |
| LED Color | RGB |
| LED Density | 36 LEDs/ft |
| LEDs per Segment | 6 |
| Length | 16.4 ft (5 m) |
| LED Lifetime | 50000 Hours |
|
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply.   |
16.4 ft (5 m) |
| Minimum Cut Length | 50mm (1.97in) |
| Operating Voltage | 24 VDC |
| Series | DynamicColor |
| Strip Width | 12mm (0.47in) |
| Wattage | 96 Watts |
| Wattage per Foot | 5.8 W/ft |
| Wire Length | 6 in. |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
