24-Channel LED DMX512 and RDM Digital Decoder and Master - 4 A/CH - Digital Display - 12-24 VDC
Part Number:
DMX-24CH-4A-3
Manufacturer Part Number:
$249.99
ea.
Was
In Stock
Similar Products Available Today
Features
- DMX 512 RDM digital decoder and master
- Converts DMX512 for single-color, RGB, or RGBW LED lighting
- Multiple DMX in/out ports: RJ45, XLR, and screw post
- Four built-in programs, speed, and brightness adjustable
- 4A per channel, 96A max total output
Most Popular Compatible Products
Overview
The 24-channel LED DMX RDM digital decoder and master is a versatile LED lighting controller. In master mode, control the brightness, speed, and selection of pre-programmed color-chasing effects for custom lighting. It features RDM bi-direction communication enabling it to detect and display decoder information from your lights and set DMX addresses. This low-voltage DMX decoder controls up to 24 channels. It converts DMX512 signal to control single-color, RGB, RGBW, RGB+W, RGB+CCT, and tunable white LED lights with an easy-to-use digital interface. It has a maximum of 4A per channel and a total of 2,304 watts at 24 VDC. The digital display shows the selectable DMX address, PWM frequency, 8-bit / 16-bit PWM output resolution, and dimming curve settings. The PWM frequency is adjustable from 500 Hz to 35 kHz (10 kHz default) for flicker-free lighting in video and photography applications. Ideal for theater and live sound DJ performances. It includes one male and one female XLR 3-pin terminal and two RJ45 in/out terminals.
Product Details:
- Screw terminal, RJ45, and XLR3 connections for input and output
- PWM frequency: 500 Hz to 35 kHz (10 kHz default)
- Dimming curve gamma value: 0.1 - 9.9 (1.5 default)
- 12 VDC - 48 watts per channel
- 24 VDC - 96 watts per channel
- Up to 2,304 watts total
- Short circuit protection
Documents
DMX-24CH-4A-3 User Manual Dimensional Drawings
Applications:
- Broadcast Studios
- Photography Lighting
- Stage & Theaters
- Studios
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Specifications
| Ambient Operating Temperature | -20 to 50 °C (-4 to 122 °F) |
|---|---|
| Amps | 96 Amps |
| Amps Per Channel | 4 Amps/CH |
| Control Type | DMX512, RDM Decoder |
| DMX In/Out | RJ45, Screw Terminals, XLR3 |
|
Environmental Rating
Environmental Rating
Suitable for Dry Locations This marking indicates that you can use the light or component in a location not normally subject to dampness. This may include locations exposed to temporary dampness, such as a building under construction, provided that ventilation is adequate to prevent moisture accumulation. Use these fixtures in living rooms, bedrooms, offices, hallways, and similar areas. The marking may be "SUITABLE FOR DAMP LOCATIONS" or "DRY LOCATIONS ONLY."Suitable for Damp Locations Fixtures marked “SUITABLE FOR DAMP LOCATIONS” or “SUITABLE FOR WET LOCATIONS” can be installed in damp locations. A damp location is an exterior or interior location regularly or occasionally subject to moisture condensation on or around electrical equipment. It includes partially protected places such as covered patios and porches. Damp locations include any regularly muggy or humid area, such as above a kitchen sink or stove, and appropriately vented bathrooms near the tub or shower.Suitable for Wet Locations Fixtures and components marked "SUITABLE FOR WET LOCATIONS" can be installed in wet or damp locations. A wet location is anywhere water or other liquids may drip, splash, or flow on or against electrical equipment. A light marked "SUITABLE FOR WET LOCATIONS" may have additional markings that tell where and at what height it can be safely mounted. Uncovered outdoor areas like decks, gazebos, walls, and typical landscape lighting sites all fall under the heading of wet locations. |
Non-weatherproof |
| Input Connection Type | Screw Terminal, XLR3 (Male), RJ45 |
|
IP Rating
IP Rating
 |
IP20 |
| Max Input Current | 96.5 A |
| Max Wattage | 1152W @ 12 VDC, 2304W @ 24 VDC |
| Number of Channels | 24 Channels |
| Output Connection Type | RJ45, XLR3 (Female) |
| Product Materials | Steel |
| Voltage | 12-24 VDC |
| Warranty | 2 Year |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Industrial Commercial Lighting reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
