In-Fixture Compact Emergency LED Driver and Battery Pack - 8W - 24-48 VDC
Part Number:
BLD-CM20N-480800
Manufacturer Part Number:
Discontinued
Similar Products Available Today
Features
- Compact design suitable for in-fixture installation
- Provides full-power backup up to 25W for 90 minutes or more
- LiFePO4 battery - full recharge in 24 hours after complete discharge
- Wide range input voltage - 100–277 VAC
- 8W constant power 25–48 VDC output
- 200–400 mA output (relative to 25–48 VDC voltage)
- UL924 Listed
- 5 year warranty
Most Popular Compatible Products
Overview
The BLD-CM20N-480800 emergency LED driver and battery pack works with LED drivers in commercial luminaires to keep them powered during emergency outages. When AC supply power is lost in the event of a power outage, the emergency driver switches on automatically to provide backup battery power directly to LED arrays at a rated output voltage of 25-48 VDC. The superior LiFePO4 battery provides backup light for a minimum of 90 minutes, with 10 times the shelf life of a traditional lead acid battery. The emergency battery and driver kit are UL924 Listed and allow for both field and factory installations on suitable LED luminaires. The compact, modular design of this kit is ideal for installation in-fixture as well to accommodate a wider variety of installation types than more traditional emergency backup drivers/batteries with out sacrificing performance.
Product Details:
- Compact, modular design allows in-fixture installation
- Included remote test switch/charge indicator module
- Housing constructed of durable steel
- Soft switching to prevent voltage spikes and increase longevity of the LED modules
- Operating temperature range of 32°–122° F
- Wide range input voltage - 100–277 VAC
- 8 W constant power 25–48 VDC output
- 200–400 mA output (relative to 25–48 VDC voltage)
- Rated IP20, suitable for damp locations
- Open/Short/Over-Voltage/Over Temperature protection
- AC LED driver output cannot exceed 150W or 4A
- UL924 Listed
- 5 year warranty
BLD-CM20N-480800 Specification Sheet Dimensional Drawings
Applications:
- Commercial Downlights
- Emergency Lights
- Linear High Bays
- Linear Strip Fixtures
- Panel Lights
- Troffer Fixtures
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Specifications
| Ambient Operating Temperature | 0 to 50 °C (32 to 122 °F) |
|---|---|
| Battery Type | LiFePO4 |
| Brand | Super Bright LEDs |
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here . |
CE, UL Listed |
| Dimmable | No |
| Emergency Operation Time | 90+ Minutes |
|
Environmental Rating
Environmental Rating
Suitable for Dry Locations This marking indicates that you can use the light or component in a location not normally subject to dampness. This may include locations exposed to temporary dampness, such as a building under construction, provided that ventilation is adequate to prevent moisture accumulation. Use these fixtures in living rooms, bedrooms, offices, hallways, and similar areas. The marking may be "SUITABLE FOR DAMP LOCATIONS" or "DRY LOCATIONS ONLY."Suitable for Damp Locations Fixtures marked “SUITABLE FOR DAMP LOCATIONS” or “SUITABLE FOR WET LOCATIONS” can be installed in damp locations. A damp location is an exterior or interior location regularly or occasionally subject to moisture condensation on or around electrical equipment. It includes partially protected places such as covered patios and porches. Damp locations include any regularly muggy or humid area, such as above a kitchen sink or stove, and appropriately vented bathrooms near the tub or shower.Suitable for Wet Locations Fixtures and components marked "SUITABLE FOR WET LOCATIONS" can be installed in wet or damp locations. A wet location is anywhere water or other liquids may drip, splash, or flow on or against electrical equipment. A light marked "SUITABLE FOR WET LOCATIONS" may have additional markings that tell where and at what height it can be safely mounted. Uncovered outdoor areas like decks, gazebos, walls, and typical landscape lighting sites all fall under the heading of wet locations. |
Non-weatherproof, Suitable for Damp Locations |
| Input Connection Type | Screw Terminal |
| Integrated Surge Protection | 1 kV (L-N) |
|
IP Rating
IP Rating
 |
IP20 |
| Output Connection Type | Push Terminal |
| Product Materials | Steel Housing |
| Recharge Time | 24 Hours |
| UL File Number | E493915 |
| Warranty | 5 Year |
| Wattage | 8 Watts |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
