3500K - LED Retrofit Light Kits

Convert fluorescent tubes to LEDs with these complete strip light retrofit kits. These are a great solution for retrofitting existing 4 ft and 8 ft T8/T12 fluorescent strip light fixtures in workshops, garages, warehouses, and other industrial facilities. Strip light retrofit kits attach to the existing lamp holder and require bypassing the ballast and wiring in the included driver.

Retrofit magnetic strip kits replace fluorescent tubes in strip fixtures or troffers. Each magnetic strip mimics the appearance of traditional fluorescent tubes. These strips snap directly into the existing steel fixtures regardless of the fixture tombstone or socket configuration. During installation, the ballast must be bypassed.

The metal halide replacement kit includes an LED bulb replacement, an LED driver, and a screw base. This retrofit solution screws into existing metal halide fixture sockets in high bay, wall pack, and shoebox fixtures to provide large industrial facilities with energy-efficient lighting. During installation, you must bypass the ballast and wire in the driver.

LED troffer retrofit kits are installed into existing fluorescent fixture housing to upgrade existing fluorescent troffers and tube lights. Available as an LED replacement for 2’ x 2’ and 2’ x 4’ troffers, these kits include all necessary mounting brackets and hardware. During installation, you must remove all existing lighting hardware, ballasts, and tombstones.

Since LEDs use a lower wattage to emit the same amount of light as traditional lighting solutions, you will need to find a retrofit kit with an equivalent wattage to the light you are trying to replace. An equivalent wattage is the LED equivalent of a fluorescent or metal halide light that has the same lumen output. If an equivalent wattage is not listed, you can also find a retrofit kit emitting the same lumens as your current lighting.

When choosing a magnetic retrofit kit or strip light retrofit kit, it is important to select one of our equivalent kits that will mimic the appearance of your existing tubes or strip fixtures. Use the equivalency comparison below to help determine which option is best.