MaxLite Round Control Node - PIR Motion Sensor and Photocell - Plug-and-Play - Dimmable
Part Number:
CNA-RDMSW
Manufacturer Part Number:
$39.99
ea.
Was
In Stock
Similar Products Available Today
Features
- Simple "Plug-and-Play” Connection
- Daylight Harvesting via Photocell
- Ability to set High Trim
- Locking screw included to resist vandalism and withstand vibration
In-House Test Lab
Each of our products undergoes rigorous testing in our in-house test lab to verify quality and specifications.
Hassle-Free Returns & Exchanges
Industry-Leading 45-Day Return & 90-Day Exchange Policies*
Free Lighting Layout Consultation
If you're looking for a customized, energy-efficient lighting layout, our industrial & commercial lighting experts can provide an assessment tailored to your floorplan.
Most Popular Compatible Products
Overview
The MaxLite Round Control Node with a PIR motion sensor and photocell is easy to install in the field with a pre-installed USB-C receptacle in controls-ready fixtures. The control node has a 0-10V dimming method with dim-to-off capacity and daylight harvesting via continuous adjustment mode. Pair with the MaxLite IP Remote Control for easy programming (sold separately).
Product Details:
- 0-10V Dimming
- Includes locking screw
- Ability to set High Trim
- 5 Year Warranty
Documents
CNA-RDMSW Specification Sheet Dimensional Drawings
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Specifications
| Ambient Operating Temperature | -40 to 55 °C (-40 to 131 °F) |
|---|---|
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application.The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here. |
Certified by UL |
| Detection Range | 39.4 ft (12 m) |
|
Dimmer Type
Dimmer Type
|
0-10V |
|
Environmental Rating
Environmental Rating
Suitable for Dry Locations This marking indicates that you can use the light or component in a location not normally subject to dampness. This may include locations exposed to temporary dampness, such as a building under construction, provided that ventilation is adequate to prevent moisture accumulation. Use these fixtures in living rooms, bedrooms, offices, hallways, and similar areas. The marking may be "SUITABLE FOR DAMP LOCATIONS" or "DRY LOCATIONS ONLY."Suitable for Damp Locations Fixtures marked “SUITABLE FOR DAMP LOCATIONS” or “SUITABLE FOR WET LOCATIONS” can be installed in damp locations. A damp location is an exterior or interior location regularly or occasionally subject to moisture condensation on or around electrical equipment. It includes partially protected places such as covered patios and porches. Damp locations include any regularly muggy or humid area, such as above a kitchen sink or stove, and appropriately vented bathrooms near the tub or shower.Suitable for Wet Locations Fixtures and components marked "SUITABLE FOR WET LOCATIONS" can be installed in wet or damp locations. A wet location is anywhere water or other liquids may drip, splash, or flow on or against electrical equipment. A light marked "SUITABLE FOR WET LOCATIONS" may have additional markings that tell where and at what height it can be safely mounted. Uncovered outdoor areas like decks, gazebos, walls, and typical landscape lighting sites all fall under the heading of wet locations. |
Waterproof |
| Finish | White |
| Input Connection Type | 3.5mm Barrel Connector |
| Input Voltage | 12-20 VDC |
|
IP Rating
IP Rating
 |
IP66 |
| Output Voltage | 0-10 V |
| Product Materials | Polycarbonate |
| UL File Number | E511069 |
| Warranty | 5 Year |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Industrial Commercial Lighting reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
